SF 20 Sliding System / All Glass
The SUNFLEX all-glass sliding system SF 20 enables the individual parallel sliding panels to be moved horizontally to either one or both sides. On opening and closing the first sliding panel, the other sliding panels are automatically opened and closed by integrated followers. The floor-mounted construction means that wide openings can be achieved without additional roof supports. The lower ball-bearing mounted carriages ensure the optimum and smooth running of the individual sliding panels. Height compensation of the ceiling rail up to 20 mm and height adjustment of the rollers up to 5mm allow the sliding system to compensate easily for structural sagging of the eaves or lintel and permit quick and simple installation.
Technical Details
Downloads
System Information
Profile system
- Floor mounted sliding system
- Sliding to the left or right as desired
- 15 mm panel construction depth
- With 3-, 5- or 7-track slide and guide rail
- follower function for sliding panel means system is easy to use
- floor rail with anti-slip coating can be integrated into the floor to provide an unobstructed living space
- internal or external locking of the sliding panels (optional)
- unpressurized drainage and easy cleaning due to optimum length of rails
- glazing with toughened safety glass
- panel structure of 8 or 10 mm
- powder coating
Fittings
- All fittings are concealed within the profiles.
- Low-maintenance, non-corroding and fail-safe fittings
- Integrated followers automatically move the adjacent panels when opening and closing the sliding panel
- Various handles and C-pull handles available for inside and outside
- Inside and/or outside locking possible
- Optionally with inside or outside lever lock
Running assembly
- Low-noise, ball bearing rollers with wear-resistant and low-maintenance running surfaces
- The carriages feature a height adjustment of up to 5 mm
- The load capacity of the carriages is 80 kg/panel (maximum panel weight)
- Sealing and ventilation
- Sliding panels overlap vertically by approximately 24 mm
- Gap of approximately 8 mm between glass panels (when 10 mm glazing is used)
- Gap sealing optionally via transparent PVC gap gaskets or aluminum profile with brush gaskets
- Brush gaskets are fitted horizontally at the top and at the vertical frame on the inside and outside
Glazing
- 8 or 10 mm tempered safety glass panes (ESG-H)
Drainage
- Inclined floor construction and length-optimized webs
- End caps for lateral sealing of the bottom tracks
